Merge branch 'master' into hp-ux

Variables with a leading 0 are treated as base-8, so it halts HP-UX
detection because of the error.

CHANGELOG.md

@@ -3,25 +3,14 @@
 - [**@yslgirl**](https://github.com/yslgirl)
 - [**@iandrewt**](https://github.com/iandrewt)
 - [**@chrisweeksnz**](https://github.com/chrisweeksnz)
-- [**@dawidd6**](https://github.com/dawidd6)
-- [**@MitchWeaver**](https://github.com/MitchWeaver)
-- [**@StarryTony**](https://github.com/StarryTony)
 
 
 ## OS
 
 - Fixed detection bug with Gentoo.
-- Fixed detection bug with TrueOS. [**@dawidd6**](https://github.com/dawidd6)
 - Added support for macOS High Sierra. [**@yslgirl**](https://github.com/yslgirl)
 - Added support for Container Linux by CoreOS. [**@chrisweeksnz**](https://github.com/chrisweeksnz)
 - Added support for 2017 iOS devices [**@iandrewt**](https://github.com/iandrewt)
-- Added support for LEDE. [**@dawidd6**](https://github.com/dawidd6)
-
-
-## Images
-
-- [MacOS/iTerm2] Fixed thumbnail not appearing (replaced by placeholder) [**@StarryTony**](https://github.com/StarryTony)
-
 
 ## Info
 
@@ -33,10 +22,6 @@
 
 - [macOS] Fixed Install Date. [**@iandrewt**](https://github.com/iandrewt)
 
-**Package Manager**
-
-- Added detection for Sabotage Linux's `butch` [**@MitchWeaver**](https://github.com/MitchWeaver)
-
 **Resolution**
 
 - [macOS] Fixed errors on non-retina screens. [**@iandrewt**](https://github.com/iandrewt)

ascii/distro/lede

@@ -1,9 +0,0 @@
-    ${c1} _________
-    /        /\
-   /  LE    /  \
-  /    DE  /    \
- /________/  LE  \
- \        \   DE /
-  \    LE  \    /
-   \  DE    \  /
-    \________\/

config/config.conf

@@ -617,8 +617,18 @@ image_loop="off"
 # Values:  'dir'
 thumbnail_dir="${XDG_CACHE_HOME:-${HOME}/.cache}/thumbnails/neofetch"
 
+# Crop mode
+#
+# Default:  'normal'
+# Values:   'normal', 'fit', 'fill'
+# Flag:     --crop_mode
+#
+# See this wiki page to learn about the fit and fill options.
+# https://github.com/dylanaraps/neofetch/wiki/What-is-Waifu-Crop%3F
+crop_mode="normal"
+
 # Crop offset
-# Note: Only affects 'square' image size.
+# Note: Only affects 'normal' crop mode.
 #
 # Default:  'center'
 # Values:   'northwest', 'north', 'northeast', 'west', 'center'
@@ -627,21 +637,20 @@ thumbnail_dir="${XDG_CACHE_HOME:-${HOME}/.cache}/thumbnails/neofetch"
 crop_offset="center"
 
 # Image size
-# NOTE: 'square' is the OLD behavior.
-# NOTE: 'auto' keeps image aspect ratio and size where possible.
+# The image is half the terminal width by default.
 #
 # Default: 'auto'
-# Values:  'auto', 'square'
+# Values:  'auto', '00px', '00%', 'none'
 # Flags:   --image_size
 #          --size
 image_size="auto"
 
-# Gap between image and text
+# Ggap between image and text
 #
-# Default: '4'
+# Default: '3'
 # Values:  'num', '-num'
 # Flag:    --gap
-gap=4
+gap=3
 
 # Image offsets
 # Only works with the w3m backend.

neofetch

@@ -44,6 +44,7 @@ get_os() {
         "MINIX") os="MINIX" ;;
         "AIX") os="AIX" ;;
         "IRIX64") os="IRIX" ;;
+        "HP-UX") os="HP-UX" ;;
         *)
             printf "%s\n" "Unknown OS detected: '$kernel_name', aborting..." >&2
             printf "%s\n" "Open an issue on GitHub to add support for your OS." >&2
@@ -153,7 +154,7 @@ get_distro() {
 
                     # Workarounds for FreeBSD based distros.
                     [[ -f "/etc/pcbsd-lang" ]] && distro="PCBSD"
-                    [[ -f "/etc/trueos-lang" ]] && distro="TrueOS"
+                    [[ -f "/etc/rc.conf.trueos" ]] && distro="TrueOS"
 
                     # /etc/pacbsd-release is an empty file
                     [[ -f "/etc/pacbsd-release" ]] && distro="PacBSD"
@@ -226,8 +227,11 @@ get_distro() {
             distro="AIX $(oslevel)"
         ;;
 
-        "IRIX")
-            distro="IRIX ${kernel_version}"
+        "IRIX" | "HP-UX")
+            distro="$os ${kernel_version}"
+            case "$distro_shorthand" in
+                "on" | "tiny") distro="${distro/ ${kernel_version}}" ;;
+            esac
         ;;
     esac
 
@@ -339,6 +343,10 @@ get_model() {
         "AIX")
             model="$(/usr/bin/uname -M)"
         ;;
+
+        "HP-UX")
+            model="$(model)"
+        ;;
     esac
 
     # Remove dummy OEM info.
@@ -368,8 +376,8 @@ get_title() {
 }
 
 get_kernel() {
-    # Since these OS are integrated systems, it's better to skip this function altogether
-    [[ "$os" =~ (AIX|IRIX) ]] && return
+    # Since AIX has no useful output in uname, it's better to skip this function altogether
+    [[ "$os" == "AIX" ]] && return
 
     case "$kernel_shorthand" in
         "on")  kernel="$kernel_version" ;;
@@ -377,7 +385,7 @@ get_kernel() {
     esac
 
     # Hide kernel info if it's identical to the distro info.
-    if [[ "$os" =~ (BSD|MINIX) && "$distro" == *"$kernel_name"* ]]; then
+    if [[ "$os" =~ (BSD|MINIX|IRIX|HP-UX) && "$distro" == *"$kernel_name"* ]]; then
         case "$distro_shorthand" in
             "on" | "tiny") kernel="$kernel_version" ;;
             *) unset kernel ;;
@@ -417,8 +425,8 @@ get_uptime() {
                     seconds="${seconds/.*}"
                 ;;
 
-                "AIX" | "IRIX")
-                    t="$(LC_ALL=POSIX ps -o etime= -p 1)"
+                "AIX" | "IRIX" | "HP-UX")
+                    t="$(LC_ALL=POSIX UNIX95=1 ps -o etime= -p 1)"
                     d="0" h="0"
                     case "$t" in *"-"*) d="${t%%-*}"; t="${t#*-}";; esac
                     case "$t" in *":"*":"*) h="${t%%:*}"; t="${t#*:}";; esac
@@ -552,9 +560,6 @@ get_packages() {
                 packages="$((packages+=$(ls -d -1 "${package_dir[@]}" | wc -l)))"
             fi
 
-            type -p butch >/dev/null && \
-                packages="$((packages+=$(butch list | wc -l)))"
-
             if type -p pkg >/dev/null; then
                 case "$kernel_name" in
                     "FreeBSD") packages="$((packages+=$(pkg info | wc -l)))" ;;
@@ -602,6 +607,10 @@ get_packages() {
         "IRIX")
             packages="$(($(versions -b | wc -l)-3))"
         ;;
+
+        "HP-UX")
+            packages="$(($(swlist -l product | wc -l)-6))"
+        ;;
     esac
 
     ((packages == 0)) && unset packages
@@ -689,10 +698,6 @@ get_de() {
         *"xfce5"*) de="Xfce5" ;;
         *"xfce"*)  de="Xfce" ;;
         *"mate"*)  de="MATE" ;;
-        *"GNOME"*)
-            de="$(gnome-shell --version)"
-            de="${de/Shell }"
-        ;;
     esac
 
     # Log that the function was run.
@@ -758,7 +763,7 @@ get_wm_theme() {
         ;;
 
         "Sawfish")
-            wm_theme="$(awk -F '\\(quote|\\)' '/default-frame-style/ {print $(NF-4)}' \
+            wm_theme="$(awk -F ")" '/\(quote default-frame-style/ {print $2}' \
                       "${HOME}/.sawfish/custom")"
         ;;
 
@@ -926,12 +931,7 @@ get_cpu() {
             esac
 
             speed_dir="/sys/devices/system/cpu/cpu0/cpufreq"
-
-            # Select the right temperature file.
-            for temp_dir in /sys/class/hwmon/*; do
-                [[ "$(< "${temp_dir}/name")" =~ (coretemp|fam15h_power) ]] && \
-                    { temp_dir="${temp_dir}/temp1_input"; break; }
-            done
+            temp_dir="/sys/class/hwmon/hwmon0/temp1_input"
 
             # Get CPU speed.
             if [[ -d "$speed_dir" ]]; then
@@ -949,8 +949,8 @@ get_cpu() {
 
             # Get CPU temp.
             if [[ -f "$temp_dir" ]]; then
-                deg="$(< "$temp_dir")"
-                deg="$((deg * 100 / 10000))"
+                temp="$(< "$temp_dir")"
+                temp="$((temp * 100 / 10000))"
             fi
 
             # Get CPU cores.
@@ -1013,12 +1013,12 @@ get_cpu() {
             # Get CPU temp.
             case "$kernel_name" in
                 "FreeBSD"* | "DragonFly"* | "NetBSD"*)
-                    deg="$(sysctl -n dev.cpu.0.temperature)"
-                    deg="${deg/C}"
+                    temp="$(sysctl -n dev.cpu.0.temperature)"
+                    temp="${temp/C}"
                 ;;
                 "OpenBSD"* | "Bitrig"*)
-                    deg="$(sysctl -n hw.sensors.lm0.temp0)"
-                    deg="${deg/ degC}"
+                    temp="$(sysctl -n hw.sensors.lm0.temp0)"
+                    temp="${temp/ degC}"
                 ;;
             esac
         ;;
@@ -1082,6 +1082,18 @@ get_cpu() {
             # Get CPU cores.
             cores="$(sysconf NPROC_ONLN)"
         ;;
+
+        "HP-UX")
+            # Get CPU name.
+            # This will be partial for now, because apparently hppa and
+            # IA64 has different approaches of how it should be handled.
+
+            # Get CPU speed.
+            # Same reasons as above.
+
+            # Get CPU cores.
+            cores="$(ioscan -k | grep -c "processor")"
+        ;;
     esac
 
     # Remove un-needed patterns from cpu output.
@@ -1135,15 +1147,15 @@ get_cpu() {
     fi
 
     # Add CPU temp to the output.
-    if [[ "$cpu_temp" != "off" && "$deg" ]]; then
-        deg="${deg//.}"
+    if [[ "$cpu_temp" != "off" && "$temp" ]]; then
+        temp="${temp//.}"
 
         # Convert to Fahrenheit if enabled
-        [[ "$cpu_temp" == "F" ]] && deg="$((deg * 90 / 50 + 320))"
+        [[ "$cpu_temp" == "F" ]] && temp="$((temp * 90 / 50 + 320))"
 
         # Format the output
-        deg="[${deg/${deg: -1}}.${deg: -1}°${cpu_temp:-C}]"
-        cpu="$cpu $deg"
+        temp="[${temp/${temp: -1}}.${temp: -1}°${cpu_temp:-C}]"
+        cpu="$cpu $temp"
     fi
 }
 
@@ -1417,6 +1429,13 @@ get_memory() {
             mem_free="$((mem_stat[5] / 1024))"
             mem_used="$((mem_total - mem_free))"
         ;;
+
+        "HP-UX")
+            mem_total="$(machinfo | awk -F':' '/Memory/ {print $2}')"
+            mem_total="${mem_total/MB*}"
+            mem_free="$(($(vmstat | awk 'NR==3{printf $5}') / 1024))"
+            mem_used="$((mem_total - mem_free))"
+        ;;
     esac
     memory="${mem_used}${mem_label:-MiB} / ${mem_total}${mem_label:-MiB}"
 
@@ -2044,7 +2063,7 @@ get_disk() {
     # Get "df" version.
     df_version="$(df --version 2>&1)"
     case "$df_version" in
-        *"Tracker"*) # Haiku
+        *"blocks"*) # Haiku
             err "Your version of df cannot be used due to the non-standard flags"
             return
         ;;
@@ -2056,7 +2075,10 @@ get_disk() {
     # Create an array called 'disks' where each element is a separate line from
     # df's output. We then unset the first element which removes the column titles.
     IFS=$'\n'
-    disks=($(df "${df_flags[@]}" "${disk_show[@]:-/}"))
+    case "$os" in
+        "HP-UX") disks=($(bdf "${disk_show[@]:-/}" 2>/dev/null)); df_version="bdf" ;;
+        *) disks=($(df "${df_flags[@]}" "${disk_show[@]:-/}" 2>/dev/null)) ;;
+    esac
     unset 'disks[0]'
     IFS="$old_ifs"
 
@@ -2072,9 +2094,10 @@ get_disk() {
         disk_perc="${disk_info[4]/'%'}"
 
         case "$df_version" in
-            *"befhikm"*)
-                disk="$((disk_info[2]/1024/1024))G / $((disk_info[1]/1024/1024))G (${disk_perc}%)"
+            *"befhikm"*|"bdf")
+                disk="$((disk_info[2]/1024/1024))G / $((disk_info[1]/1024/1024)) (${disk_perc}%)"
             ;;
+
             *) disk="${disk_info[2]/i} / ${disk_info[1]/i} (${disk_perc}%)" ;;
         esac
 
@@ -2252,6 +2275,7 @@ get_install_date() {
             esac
         ;;
         "AIX") install_file="/var/adm/ras/bosinstlog" ;;
+        "HP-UX") install_file="/dev/config" ;;
     esac
 
     ls_prog="$(ls --version 2>&1)"
@@ -2272,7 +2296,7 @@ get_install_date() {
             install_date="$(ls -tcd --full-time "$install_file" | awk '{printf $6 " " $7}')"
         ;;
 
-        *"ACFHLNRS"* | *"RadC1xmnlog"*) # AIX ls / IRIX ls
+        *"ACFHLNRS"* | *"RadC1xmnlog"* | *"1ARadeCx"*) # AIX ls / IRIX ls / HP-UX ls
             err "Install Date doesn't work because your 'ls' doesn't support full date/time."
             return
         ;;
@@ -2302,16 +2326,10 @@ get_gpu_driver() {
             gpu_driver="$(lspci -nnk | awk -F ': ' \
                           '/Display|3D|VGA/{nr[NR+2]}; NR in nr {printf $2 ", "}')"
             gpu_driver="${gpu_driver%, }"
-
-            if [[ "$gpu_driver" == *"nvidia"* ]]; then
-                gpu_driver="$(< /proc/driver/nvidia/version)"
-                gpu_driver="${gpu_driver/*Module  }"
-                gpu_driver="NVIDIA ${gpu_driver/  *}"
-            fi
         ;;
         "Mac OS X")
             if [[ "$(kextstat | grep "GeForceWeb")" != "" ]]; then
-                gpu_driver="NVIDIA Web Driver"
+                gpu_driver="Nvidia Web Driver"
             else
                 gpu_driver="macOS Default Graphics Driver"
             fi
@@ -2667,32 +2685,44 @@ get_image_size() {
     font_width="$((term_width / columns))"
     font_height="$((term_height / lines))"
 
-    # Get image size.
+    case "$image_size" in
+        "auto")
+            image_size="$((columns * font_width / 2))"
+            term_height="$((term_height - term_height / 4))"
+
+            ((term_height < image_size)) && \
+                image_size="$term_height"
+        ;;
+
+        *"%")
+            percent="${image_size/\%}"
+            image_size="$((percent * term_width / 100))"
+
+            (((percent * term_height / 50) < image_size)) && \
+                image_size="$((percent * term_height / 100))"
+        ;;
+
+        "none")
+            # Get image size so that we can do a better crop.
             size="$(identify -format "%w %h" "$image")"
             width="${size%% *}"
             height="${size##* }"
-
-    case "$image_size" in
-        "square")
-            width="$((columns * font_width / 2))"
-            height="$width"
+            crop_mode="none"
         ;;
 
-        *)
-            while (( width >= (term_width / 2) ||
-                     height >= (term_height / 2) )); do
-                width="$((width * 10 / 15))"
-                height="$((height * 10 / 15))"
-            done
-        ;;
+        *) image_size="${image_size/px}" ;;
     esac
 
+    width="${width:-$image_size}"
+    height="${height:-$image_size}"
+
     text_padding="$((width / font_width + gap + xoffset/font_width))"
 }
 
 make_thumbnail() {
-    # Name the thumbnail using variables so we can use it later.
-    image_name="$image_size-$crop_offset-$width-$height-${image##*/}"
+    # Name the thumbnail using variables so we can
+    # use it later.
+    image_name="$crop_mode-$crop_offset-$width-$height-${image//'/'/_}"
 
     # Handle file extensions.
     case "${image##*.}" in
@@ -2704,17 +2734,62 @@ make_thumbnail() {
     # Create the thumbnail dir if it doesn't exist.
     mkdir -p "$thumbnail_dir"
 
-    [[ ! -f "$thumbnail_dir/$image_name" ]] && \
+    # Check to see if the thumbnail exists before we do any cropping.
+    if [[ ! -f "$thumbnail_dir/$image_name" ]]; then
+        # Get image size so that we can do a better crop.
+        if [[ -z "$size" ]]; then
+            size="$(identify -format "%w %h" "$image")"
+            og_width="${size%% *}"
+            og_height="${size##* }"
+
+            # This checks to see if height is greater than width
+            # so we can do a better crop of portrait images.
+            size="$og_height"
+            ((og_height > og_width)) && size="$og_width"
+        fi
+
+        case "$crop_mode" in
+            "fit")
+                c="$(convert "$image" \
+                    -colorspace srgb \
+                    -format "%[pixel:p{0,0}]" info:)"
+
                 convert \
-            "$image" \
-            -strip \
-            -quality 50 \
-            -gravity "$crop_offset" \
                     -background none \
-            -sample "$width"x"$height"^ \
+                    "$image" \
+                    -trim +repage \
+                    -gravity south \
+                    -background "$c" \
+                    -extent "$size"x"$size" \
+                    -scale "$width"x"$height" \
+                    "$thumbnail_dir/$image_name"
+            ;;
+
+            "fill")
+                convert \
+                    -background none \
+                    "$image" \
+                    -trim +repage \
+                    -scale "$width"x"$height"^ \
                     -extent "$width"x"$height" \
                     "$thumbnail_dir/$image_name"
+            ;;
 
+            "none") cp "$image" "$thumbnail_dir/$image_name" ;;
+            *)
+                convert \
+                    -background none \
+                    "$image" \
+                    -gravity "$crop_offset" \
+                    -crop "$size"x"$size"+0+0 \
+                    -quality 95 \
+                    -scale "$width"x"$height" \
+                    "$thumbnail_dir/$image_name"
+            ;;
+        esac
+    fi
+
+    # The final image.
     image="$thumbnail_dir/$image_name"
 }
 
@@ -3358,11 +3433,6 @@ get_distro_colors() {
             ascii_file="kubuntu"
         ;;
 
-        "LEDE"*)
-            set_colors 4 7 1
-            ascii_file="lede"
-        ;;
-
         "Linux")
             set_colors fg 8 3
             ascii_file="linux"
@@ -4035,7 +4105,7 @@ dynamic_prompt() {
     fi
 
     # Set the prompt location.
-    ((lines > 1)) && printf "%b" "\033[${lines}B"
+    ((lines > 0)) && printf "%b" "\033[${lines}B"
 }
 
 old_functions() {
@@ -4402,9 +4472,11 @@ ASCII:
 IMAGE:
     --loop                      Redraw the image constantly until Ctrl+C is used. This fixes issues
                                 in some terminals emulators when using image mode.
-    --size auto | --size square How to size the image.
+    --size 00px | --size 00%    How to size the image.
                                 Possible values: auto, 00px, 00%, none
-    --crop_offset value         Change the crop offset for square mode.
+    --crop_mode mode            Which crop mode to use
+                                Takes the values: normal, fit, fill
+    --crop_offset value         Change the crop offset for normal mode.
                                 Possible values: northwest, north, northeast,
                                 west, center, east, southwest, south, southeast
 
@@ -4699,11 +4771,6 @@ main() {
     # Take a screenshot.
     [[ "$scrot" == "on" ]] && take_scrot
 
-    # Add neofetch info to verbose output.
-    err "Neofetch command: $0 $*"
-    err "Neofetch version: $version"
-    err "Neofetch config:  $config_version"
-
     # Show error messages.
     [[ "$verbose" == "on" ]] && printf "%b" "$err" >&2
 

neofetch.1

@@ -1,5 +1,5 @@
-.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.47.5.
-.TH NEOFETCH "1" "December 2017" "Neofetch 3.3.1-git" "User Commands"
+.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.47.4.
+.TH NEOFETCH "1" "September 2017" "Neofetch 3.3.0" "User Commands"
 .SH NAME
 Neofetch \- A fast, highly customizable system info script
 .SH SYNOPSIS
@@ -259,11 +259,16 @@ Possible values: bar, infobar, barinfo, off
 Redraw the image constantly until Ctrl+C is used. This fixes issues
 in some terminals emulators when using image mode.
 .TP
-\fB\-\-size\fR auto | \fB\-\-size\fR square How to size the image.
+\fB\-\-size\fR 00px | \fB\-\-size\fR 00%
+How to size the image.
 Possible values: auto, 00px, 00%, none
 .TP
+\fB\-\-crop_mode\fR mode
+Which crop mode to use
+Takes the values: normal, fit, fill
+.TP
 \fB\-\-crop_offset\fR value
-Change the crop offset for square mode.
+Change the crop offset for normal mode.
 Possible values: northwest, north, northeast,
 west, center, east, southwest, south, southeast
 .TP